2026 POTTINGER HIT 6.80T

2026

POTTINGER

HIT 6.80T

VBP00023011011284

Neu

33906

This new 2026 Pöttinger HIT 6.80 T is a 6-rotor trailed tedder designed for high-performance forage conservation, featuring DYNATECH rotors for a clean, uniform spread, superior ground tracking with small-diameter rotors, and durable, swept-back tine arms that prevent plugging. Its trailed design allows for high output with smaller tractors, featuring hydraulic, tool-free adjustment and robust, low-maintenance construction. THIS MACHINE IS EQUIPPED WITH: • 540 PTO • 25' 9” Working Width • 6 Rotor • Hydraulic Lift and Fold • DYNATECH Rotor Technology POTTINGER SIX-ROTOR TRAILED TEDDER — HIT 6.80 T HIT 6.80 T WORKING WIDTH DIN 24'5.3'' NUMBER OF ROTORS 6 PCS. Whether Tedding silage or hay, on level ground or hillsides — POTTINGER HIT tedders get the job done perfectly. Innovative DYNATECH rotor technology ensures a clean and tidy spread pattern with maximum forage conservation. As you would expect from PÖTTINGER the tedders ground tracking works perfectly and provides ideal conditions for harvesting high quality forage. HIGH PERFORMANCE WITH SMALL TRACTORS With the trailed configuration, high outputs are possible even with small tractors. The trailed tedders offer working widths (DIN) of 17'1" / 25'9" / 28'3" without the need for lifting power. FENCELINE SPREADING SYSTEM Actively setting the wheels at an angle causes the tedder to run diagonally so the forage is directed onto the mown area. Neighboring crops remain untouched. Because the wheels can be set to the left or right, fence line tedding can be activated in any driving direction. All wheels are pivoted by hand for fence line tedding. If you do not require a fence line tedding system, the wheels are mounted securely to the rotor casing as standard using roll pins. HIT 6.80 T — SIX ROTOR TEDDER The HIT 6.80 T is equipped with an additional chassis that runs behind the machine during operation in the field. The chassis lifts the machine clear of the ground at headlands and in the transport position. STRAIGHT FORWARD OPERATION Our six-rotor tedders are easy to operate hydraulically. HYDROLIFT HYDROLIFT is fitted as standard. This system raises the outer rotors to their limit position during headland turns. At the same time, the chassis lifts the machine clear of the ground. FENCELINE SPREADING SYSTEM A hydraulic fence line tedding system is also available. All the wheels can be adjusted conveniently from the tractor seat by a double-acting hydraulic cylinder into the positions left, center and right. The wheel position indicator is clearly visible from the driver's seat. If you do not require a fence line tedding system, the wheels are mounted securely to the rotor casing as standard using roll pins. COMPACT AND SAFE DURING TRANSPORT The tedder is attached to the lower linkages of the tractor by a robust yoke to provide stability during transport. The wide chassis is fitted with 260/70-15.3 tires. During operation, the chassis is folded hydraulically over the rotors. CONVENIENT OPERATION The whole machine can be operated using one double acting connection. Sequential stepping valves control all the functions one after the other in the right order.

Zugart

Rotierend

6

6

Hydraulisch

Ja

Hydraulisch

540

7.85 m

1’040.09 kg