2026 POTTINGER HIT HT 13120

2026

POTTINGER

HIT HT 13120

VBP00023014001988

Neu

33903

This new PÖTTINGER Trailed High Output Tedder offers several advantages for large-scale hay and forage operations by combining high productivity with efficient crop handling. With a working width of about 43 feet and 12 rotors, it can cover large areas quickly while spreading forage evenly to promote faster and more consistent drying. Its rotor design helps lift and distribute the crop gently while minimizing dirt contamination, improving overall forage quality. THIS MACHINE IS EQUIPPED WITH: • Fence Line Kit • 43' 3” Working Width • 12 Rotor • Hydraulic Fold • 540 PTO • Flotation Tires 260/70-15.3 • DYNATECH Rotor Technology POTTINGER TRAILED HIGH OUTPUT TEDDER — HT 13120 WORKING WIDTH DIN 41'7.99'' NUMBER OF ROTORS 12 pcs. Whether Tedding silage or hay, on level ground or hillsides - POTTINGER HIT tedders get the job done perfectly. Innovative DYNATECH rotor technology ensures a clean and tidy spread pattern with maximum forage conservation. As you would expect from PÖTTINGER the tedders ground tracking works perfectly and provides ideal conditions for harvesting high quality forage. Despite the large working widths, the tractor power required for tedding is still relatively low. Thanks to the trailed design, no load is exerted on the tractor hitch. This means that small tractors can achieve massive output using HIT HT tedders. MAXIMUM OUTPUT AND THE BEST QUALITY FORAGE To harvest top quality forage in large fields, high performance tedders are needed to follow high output mowers. Especially on large silage farms that use mowers without conditioners, or on hay farms where the wilting period plays a major role within the often short fair weather windows, maximum output is required during tedding. Perfect ground tracking paired with clean and tidy spreading work characterizes the HIT HT tedder series and guarantees that you get high quality forage. BEST SPREADING QUALITY The diameter of the rotor is 4'8"on all models. This guarantees the best spreading quality with all types of forage. The small rotors adapt ideally to bumpy ground and reduce the amount of crude ash entering the forage. They pick up smaller portions of crop, resulting in neater forage handling. Moreover, small diameter rotors do not have to spread the forage so widely, which results in an exact spread pattern with homogeneous lateral distribution. This means they can be operated at lower speeds because they do not have to spread the forage as far. That is how disintegration losses can be avoided. OPTIMUM WEIGHT DISTRIBUTION On HIT HT models, the chassis is also in use during operation. The chassis guides the rotors and supports the rotor frames. As a result, the inner rotors do not have to bear an additional load during operation, so the weight is distributed to all rotor wheels. This also ensures a uniform working height across the entire working width. LARGE FLOTATION TIRES The two innermost rotors are equipped with 16 x 9.50-8 flotation tires. This improves weight distribution during operation. The large 16 x 6.5-8 flotation tires on the rest of the rotors ensure smooth running and protect the sward, even over soft and bumpy ground. LIFTMATIC PLUS INGENIOUS LIFTING SYSTEM You will be impressed with LIFTMATIC PLUS, the advanced lifting technology on our high output HIT tedders. Before being raised, the rotors are positioned horizontally by a guide system and then lifted. This ensures that the tines do not scrape against the ground, preventing forage contamination as a result. UNIQUE HEADLAND POSITION In the headland position, high output HIT tedders provide enormous ground clearance. This enables you to drive over swaths without destroying them. Reversing is also no problem, similar to a single-axle trailer. Only one single-acting spool valve is needed to operate the lifting system. TOP QUALITY FENCELINE TEDDING SYSTEM The two rotors on the outer right-hand side can be folded backwards hydraulically by 15°. In contrast to swath curtains, the two angled rotors distribute the forage evenly to the mowed area without swath formation. The result is a strip of cleared field bordering the neighboring crop. This adjustment is made conveniently from the driver's seat using a double-acting hydraulic cylinder. CONVENIENT ROTOR HEIGHT ADJUSTMENT The correct rotor height conserves your soil and keeps the forage clean. An easily accessible hand crank provides quick, central height adjustment. For maximum operating convenience, this can also be done hydraulically from the tractor seat as an option. A clearly visible scale shows the set working height. STRAIGHTFORWARD OPERATION On models with hydraulic rotor height adjustment, the BASIC CONTROL electric pre-select system is standard. With this you can pre-select folding into the transport position, height adjustment and fence line tedding. Only one double-acting spool valve is needed to operate machine. RUGGED CONSTRUCTION FOR LONG SERVICE LIFE As a structural element, the front guard rail also increases the strength of the tedder. The lattice design stiffens the bolted tube profiles on the main frame, increasing the load capacity and service life of the entire machine. COMPACT AND SAFE DURING TRANSPORT Only one single-acting and one double-acting spool valve on the tractor is required to change from the working position to the transport position. The ingenious stepping sequence controlled by valves makes it extremely convenient to operate: • The rotors are first brought into the headland position by the single-acting spool valve. • The second spool valve is then used to fold the rotors and automatically retract the side guard. A large main frame with a strong rotor support and lowslung center of gravity together with the large tires make it possible to transport the machine at high speeds on roads without swaying. On the HIT HT 17160, the optional air brakes enhance safety even further on the road. Warning signs and road lights are standard on all models. SOIL CONSERVING TIRES The large wheels ensure not only smooth and safe road transport, but also maximum soil conservation in the field. UNIVERSAL DRAWBAR FOR HIGH OR LOW ATTACHMENT The bolted universal drawbar can be rotated 180° to match high or low linkages. A range of towing eyes or an 3.5" ball hitch are also available. This drawbar is the standard version and is characterized by its smooth running on the road. LOWER LINKAGE MOUNTING A lower linkage attachment is available for a particularly tight turning angle. The machine follows in the tractor's tracks even better because the attachment point is located further back. This version is available as an option on the HIT HT 8680, 11100 and 13120. With this version, the weight of the machine is sufficient to provide enough drawbar load on the lower linkage even in the headland position.

Zugart

Rotierend

12

6

Hydraulisch

Ja

Hydraulisch

540

13.11 m

2’375.01 kg